Guardian Technologies H1200 & H1200BL - Manual (Page 3)

®
E-5 E-4
pRODUCT SpECIFICATIONS AND pARTS
SpECIFICATIONS
MODEL NUMbER: H1200
HUMIDIFYING MODE: Ultrasonic Cool Mist
pOWER SUppLY: AC120V; 60Hz
pOWER CONSUMpTION: 30W (Cool Mist)
TANk CApACITY: 1.5 gallons
SUCCESSIVE HUMIDITY HOURS: Up to approximately 100 hours between tank refills
DIMENSIONS: 7.5”L x 9.75”W x 12.5”H
WEIGHT: 3.97 pounds
pARTS
Humidity Spout
Tank
®
Cleaning brush
Storage
Night Light LED
Dry Air
Exhaust
Tank Lid
1. Separate the tank from the
base of the unit.
2. Flip over water tank and open the
tank lid, turning it to the left.
3. Pour cool, clean water directly
into the tank. Do not pour anything
but water into the tank.
4. Close the tank lid, turning it to the right.
It is important to FIRMLY secure cap after
filling the tank with water.
5. Attach tank to base of unit.
6. Before turning on make sure there is water in the unit.
SET Up
Select a firm, level, flat location - at least six inches (15 cm) from any wall or object for proper air
flow. Place the humidifier on a water-resistant surface, as water can damage furniture and some
flooring. Do not place unit directly on carpet, towels, blankets or other absorbent surfaces.
Guardian Technologies will not accept responsibility for damage caused by water spillage.
FILLING
Make sure unit is unplugged.
DIRECTIONS FOR USE
®
power/Variable
Speed Dial
Refill Indicator LED
Night Light
Control
power
plug
base
Tank Carry
Handle
Ultrasonic
Disk