beautypg.com

Installation, Troubleshooting guide, Cleaning the unit – Guardian Technologies AC4010 User Manual

Page 3: Installing the filter

background image

E-3

E-5

E-4

insTALLATion

Features: The filter is an all-in-one multi-stage filter.

Layers of air cleaning include:

1. Charcoal removes odors and smoke.

2. hEPA captures 99.97% of airborne dust and allergens.

3. PCO captures and dissolves airborne allergens and mold.
4. UV-light bulb works with filter to kill germs.

cleaning the unit

WArninG: To avoid serious injury from electric shock, the

unit must be turned oFF and unplugged from the power outlet

prior to any cleaning.
1. TUrN ThE UNIT OFF AND UNPLUg ThE UNIT FrOM ThE

POWEr OUTLET.

2. Clean unit with a soft, damp cloth only. DO NOT pour or splash

water on the unit or use any abrasive type cleaner. Clean all

external surfaces, especially the air intake grills and air outlet.

3. reposition the unit, plug power cord into power outlet

and turn ON.

ProBLeM

soLuTion

Unit doesn't operate.

Check that unit is plugged in.
Check safety switch: remove filter. Check

small metal safety switch. switch cannot be

bent inside the unit.
Call Customer Service at 1.866.603.5900.

No air circulating from unit.

Unplug unit: Check filter and

remove bag before first use.

Increase in noise level.

Make sure filter is clean.

replace. Unplug unit: Open

bottom, remove filters and

make sure fan is clear.

Filter door does not

close properly.

Check that the installation of the

filter is correct.

TrouBLeshooTinG Guide

safety

switch

insTALLATion

The filter can be found packaged inside the Air Purifier. It is recommended

to replace the filter every six months to maintain optimal performance.

Replacement filter model number is FLT4010.

installing the Filter

1. Unplug the air purifier from the electrical outlet.

2. Lift to release the filter cover.

3. gently pull filter from unit (*and

remove bag from the filter if the

unit is new).

4. replace filter into compartment.

Make sure the dark gray side

faces up towards you.

5. To install new filter reverse steps 1-4.

do noT insert filter with

white pleated side facing up.
Dark gray side should

always face upwards.