Clarion VMA1041 - Manual (Page 9)

Problem:
Picture does not appear.
Solution:
• The TV Tuner is not set to TV mode (when using the TTX001) – Set the
function to TV mode.
• The TV Tuner is set to VTR mode (when using the TTX001) – In the VTR
mode, no picture appears if no video signal is being input to the VIDEO IN
terminal of the tuner.
Problem:
Picture has shadow or shadows.
Solution:
• Signal condition is poor – This may be due to signals reflected off
mountains or buildings. Check again in a different place or direction.
Problem:
Screen is dark.
Solution:
• The brightness control is not set properly – Adjust the brightness setting.
• Usage conditions are poor – This may happen if the temperature in the
vehicle is below 30 degrees F or above 113 degrees F. Check again when
the temperature is between 30 – 113 degrees F.
Problem:
Colors are pale or hue is poor.
Solution:
• The picture adjustment is not adjusted properly – Adjust the picture.
Problem:
Stripes or spots are on the picture.
Solution:
• Interference signals – This may be caused by interference from other
vehicles, trains, high voltage lines, neon lights, etc. Check again in another
place.
PRODUCT SPECS
8
Type:
Size:
Pixels:
Power Source Voltage:
Power Consumption:
Operation Temperature: Color TFT active matrix LCD Display
10.4" (actual panel size)
800x600 screen resolution
DC 11-15V
1.5Amax. (1.5Aor less)
30 - 113 degrees F