Great Planes Easy Sport 40 ARF - GPMA1035 - Manual (Page 4)

❏
Dremel ® MultiPro ™ or similar
❏
1 oz. Thick CA- (GPMR6014)
❏
6-Minute Pro Epoxy (GPMR6045)
❏
CA Applicator Tips (HCAR3780)
❏
Epoxy Brushes (GPMR8060)
❏
CA Debonder (GPMR6039)
❏
Trim Seal Tool (TOPR2200)
❏
Heat Gun (TOPR2000)
❏
Straightedge (Fourmost Non Slip, FORR2149)
❏
Kyosho Curved Scissors for trimming canopy (KYOR1010)
Elev = Elevator Fuse = Fuselage
LE = Leading Edge (front) LG = Landing Gear
Lt = Left Ply = Plywood
Rt = Right Stab = Stabilizer
TE = Trailing Edge (rear) " = Inches
1. Remove all parts from the box. As you do, identify each
part by comparing it with the parts list on page 5. Using a
felt-tip or ballpoint pen, lightly write the part name on each
piece to avoid confusion later. Use your bar sander or
sanding block to lightly sand the edges to remove any
irregularities or slivers.
2. As you identify and mark the parts, separate them into
groups, such as fuse (fuselage), wing, fin, stab (stabilizer)
and hardware.
Get Ready to Build
Common Abbreviations
Optional Supplies and Tools
4
Futaba ® 4NBF Conquest 4-channel Radio
Flexibility and convenience make the Futaba
Conquest FM radio systems a good choice
for experienced fliers. FUTJ39**
Great Planes Pro ™ Thin, Instant Set CA
Instant-setting Pro CA is ideal for fast
assembly, with a curing time of 1-3 seconds.
All Pro CAs are dated for freshness.
GPMR6002
O.S. ® .70 Surpass 4-stroke Engine
Lower noise, higher torque, increased fuel
economy and longer engine life make the
O.S. .70 Surpass engine an excellent choice
for your model. OSMG0870
Great Planes Pro Medium CA
Thick CA+ is an excellent gap filler that cures
in 10-15 seconds. All Pro CAs “wick” better
into balsa wood for the strongest possible
bond. GPMR6008 Great Planes Pro 6-minute Epoxy
Pure, powerful Pro 6-minute Epoxy cures
very quickly while also providing incredible
strength. Two-bottle set includes 4.5 oz.
bottles of epoxy and hardener. GPMR6045 Great Planes Pro 30-minute Epoxy
Pro 30-minute Epoxy provides modelers with
longer curing time to reposition parts and
provides greater strength for high-stress
areas. GPMR6047