Kit contents, Kit inspection – Great Planes Syncro EDF - GPMA1581 User Manual

Page 5

KIT CONTENTS

1. Fuselage/canopy hatch
2. Glider wing halves (R&L)
3. Glider wing spar
4. Glider wing spar covers
5. Jet wing
6. Jet wing spar covers
7. Horizontal stabilizer with elevators
8. Vertical stabilizer with rudder
9. Fan duct (top, bottom)
10. Fan assembly (fan housing, rotor, tail cone)
11. Foam fan cones (5)

12. Landing gear (R&L main landing gear, 40mm wheels,

nose gear, 25mm nose wheel)

13. Hardware (Glider wing dowel plate, adhesive-back hook

& loop (2), long (450mm) Y-harness, short (240mm)
Y-harness, motor wire extensions, aileron pushrods, Fan
duct mounting bolt, wing bolt collar, Phillips wing screw,
pinned hinge, 10mm wood screws (2), 3mm fl at washer (for
wing screw), micro screw-locks (4), Faslinks (6), retainers
for screw-locks (6), screws for screw-locks (8), 2mm fan
rotor adapter w/set screws, 5mm hex nut, 3x4mm fl at-
head motor mount screws (2)

Before starting to build, take an inventory of this kit to make sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you need assistance with assembly,
contact Product Support. When reporting defective or missing parts, use the part names exactly as they are written in the
Kit Contents list.

Great Planes Product Support:

3002 N Apollo Drive, Suite 1

Champaign, IL 61822

Telephone: (217) 398-8970, ext. 5

Fax: (217) 398-7721

E-mail: [email protected]

KIT INSPECTION