Grant Instruments Labwise - Manual (Page 9)

30853(1) Page 9 May 2012
2.7. Installing Optima USB drivers (Windows Vista/7)
The Labwise installation process must be completed prior to attempting to install the USB
drivers.
Drivers should be installed automatically the first time an Optima is connected via USB to a
PC. If this does not happen then the drivers can be installed manually using the following
method.
1. Connect a TX150 or TXF200 to a free USB port on the PC.
The Found New Hardware wizard should start
2. Select Browse my computer for driver software.
3. Browse to “C:\Labwise\CDM20814_WHQL_Certified”. Click Next.
4. The driver will install. Click Finish to complete. The Optima should now be ready to use.