Transmitters – Chamberlain EL25 User Manual
Page 22
Page 21
Transmitters
1 Press
2 Enter Transmitter Number (1-65534). Then (
#
)
Add a
Basic transmitter to the system's database. A basic transmitter will be active, unlock all doors/gates
assigned to the RF module with no time constraints (i.e., can be used 24 hours a day, 7 days a week.).
Activates transmitter number “34430”, facility code “3”, sequence code “2”, ID number “4” and
button “1”.
•
Example:
3 Enter Facility Code (0-255). Then (
#
)
4 Enter Sequence Code (0-2). Then (
#
)
5 Enter ID Number (0-26). Then (
#
)
6 Enter Button Number (1-4). Then (
#
)
The label on the
back
of the transmitter displays the codes necessary to program the transmitter.
To activate more than one button on a transmitter, you must repeat all steps for each button. If you want to
activate four buttons of a new transmitter, you will need to perform the Program Number
four
four times,
activating each button separately.
When adding transmitter codes, note the following:
Then
Transmitters
Transmitters
90
Add a Basic Transmitter:
90
2
3
4
5
6
1
•
PASSPORT
SW ID SEQ FC
PIN
Codes for Buttons 1-3
Button Number
ID Number
Transmitter Number
Facility Code
Sequence Code
Codes for Button 4
1-3 03 00 034 12241
4 03 00 163 45009
Important:
All
through
eps
must be
performed for
EACH Transmitter
assigned.
1
6
If you make an error during an entry, press the asterisk key (
*
) to begin again.