GME TX665 - Manual (Page 19)

T X 6 6 5 I N S T R U C T I O N M A N UA L PA G E 1 9
4. To disable the Call Melodies select ‘oF’.
5. Press the PTT to confirm and store your selection.
To send the Call Alarm Melody
Press the PTT TWICE quickly. The icon will appear and the LED indicator will light
RED for a few seconds as the melody is sent. The melody will be heard in the speaker
of the receiving radio.
NOTE: The Call Alarm can only be sent once per minute.
DUAL WATCH
The Dual Watch mode lets you to monitor two channels at the same time. While in
Dual Watch mode, the unit will monitor both the selected channel and a second Dual
Watch channel.
To Set the Dual Watch Mode
1. Hold the MENU key for 2 seconds. The channel number will flash.
2. Use the or keys to choose the ‘selected’ channel.
3. Press the MENU key repeatedly until ‘du’ is displayed. The icon will
be flashing.
4. Press the or keys to select the second ‘Dual Watch’ channel or select ‘oF’ to
disable the Dual Watch mode.
5. Press the PTT to confirm and store your selection.
While Dual Watch is active, the icon is displayed and the LCD will alternate
between the selected channel and the Dual Watch channel.
To Cancel the Dual Watch
Briefly press the MENU key followed by the key. This is equivalent to selecting ‘oF’
in the Dual Watch menu setting.
DUAL WATCH OPERATION
• If a signal is received on either channel, the radio will pause on that channel for
as long as it remains busy, then resume the Dual Watch 5 seconds after the last
transmission has ceased.
• To talk on the Dual Watch channel, press the PTT while the radio is paused on that
channel then talk in the usual way.
• To talk on the selected channel, press the PTT while no signals are being
received. The radio will switch to the selected channel. When you have finished
your conversation the radio will resume the Dual Watch 5 seconds after the last
transmission has ceased.