GME TX3500S - Manual (Page 18)

PA G E 1 8 I N S T R U C T I O N M A N UA L T X 3 5 0 0 S
INSTALLATION
The TX3500S is supplied with a slim, slide on mounting
cradle. The cradle can be screwed or bolted to any
convenient location in your vehicle (under or above the
dash, on the centre console, etc.) using the mounting slots
provided in the cradle.
The TX3500S contains a built-in speaker and should be
installed in a convenient location in the vehicle’s cabin using
the mounting slots provided in the base. For maximum sound
from the internal speaker, we recommend the cradle be
mounted above the radio to minimise any obstruction of the
speaker.
Alternatively the TX3500S can be installed in a less audible
location and an extension speaker used instead. When
installing the radio, avoid mounting it close to heaters or air
conditioners.
Console mounting
A flush mounting DIN adapter MBD001 is available as an
optional accessory. The adapter includes mounting brackets
and a specially designed front panel escutcheon to suit
most vehicle installations. See your nearest GME retailer for
details.
Din Adapter MBD001
When installing the cradle
Avoid mounting close to heaters or air conditioners. Screw
the mounting cradle to a firm surface and slide the TX3500S
into the cradle from the front until it clicks into place. Finally,
connect the power lead and antenna cable to the sockets on
the radio’s rear panel.
Mounting the cradle
Fitting the radio
Slide radio fully into cradle until it clicks into place.
44913-5_TX3500S_IM.indd 18 5/09/13 2:07 PM