GME R1W - Manual (Page 11)

G - D E K i n S t r u C t i o n M a n ua l Pa G E 1 1
FlusH mount usinG sCrews
Where the panel or bulkhead is made from thicker material
such as wood or laminated fibreglass, install the remote head
using the 4 x 25 mm threaded rods, stainless steel washers and
nuts provided.
Screw the rods into the 4 threaded holes at the rear of the
remote Head as shown and tighten firmly. Do not over tighten.
FlusH mount usinG tHreaded rods
4 x 12 mm
screws
4 x 25 mm
threaded rods