GMC 2007 Canyon - Manual (Page 66)

Extended Cab — Rear Seat
1. Attach and tighten the lower attachments to
the lower anchors. If the child restraint does
not have lower attachments or the desired
seating position does not have lower anchors,
secure the child restraint with the top tether
and the safety belts. Refer to your child
restraint manufacturer instructions and the
instructions in this manual.
1.1. Find the lower anchors (D) for the
desired seating position.
1.2. Put the child restraint on the seat.
1.3. Attach the lower attachments on the
child restraint to the lower anchors (D)
in the vehicle. The child restraint
instructions will show you how.
2. If the child restraint manufacturer recommends
that the top tether be attached, attach and
tighten the top tether to the top tether
anchor (C). Refer to the child restraint
instructions and the following steps:
2.1. Pull on the finger access tab to remove
the cover to access the top tether
anchors (C).
2.2. Route the top tether (A) through the
loop (B) at the top of the seatback to
attach the top tether to the nearest top
tether anchor (C).
66