GMC 2007 Envoy - Manual (Page 63)

For vehicles that have
a head restraint, fold
down the head restraint
and route the single
tether under the
head restraint and in
between the head
restraint posts.
See Rear Seat Operation on page 18.
If the position you
are using has a head
restraint and you
are using a dual
tether, route the
tether around the
head restraint.
3. Push and pull the child restraint in different
directions to be sure it is secure.
Securing a Child Restraint in a
Rear Outside Seat Position
If your child restraint has the LATCH system,
see Lower Anchors and Tethers for Children
(LATCH) on page 56.
If your child restraint does not have the LATCH
system, you will be using the lap-shoulder
belt to secure the child restraint in this position.
Be sure to follow the instructions that came
with the child restraint. Secure the child in the
child restraint when and as the instructions say.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and
shoulder portions of the vehicle’s safety belt
through or around the restraint. The child
restraint instructions will show you how.
63