GIN Gingo Airlite User Manual
Page 14
14
Installing the footstrap with quick release system
The optional footbar with quick release system consists of a footbar with a specially designed
rescue handle. In the event of a reserve deployment, the footbar is automatically released. This is
to eliminate the possibility of the footbar interfering with the reserve.
To install the optional quick release footstrap, wrap the webbing of the footstrap throught the
side buckle (1). Route the long yellow plastic line through the neoprene tunnel (2). Then pass the
yellow plastic line through the quick release connection (A,B,C,D) (p.15). Finally, tuck the plastic
line into the neoprene cover of the footstrap.
If the plastic line is too long, trim it to fit your leg.
NOTE: We recommend that you do not use
other types of footbar with the Gingo Airlite.
2
2
1
1