Future Retro Mondovox - Manual (Page 11)

ROUTING DIAGRAM 1
The diagram on this page shows how you
can connect a MIDI controller and four
sound modules to the Mondovox, when
using routing modes 1 or 2.
Connect the MIDI OUT of the MIDI
controller to the MIDI IN of the Mondovox.
Connect the MIDI OUT A port of the
Mondovox to the MIDI IN of the sound
module 1. The remaining three sound
modules all get daisy-chained to the first.
Connect the MIDI THRU of sound module 1
to the MIDI IN of sound module 2.
Connect the MIDI THRU of sound module 2
to the MIDI IN of sound module 3.
Connect the MIDI THRU of sound module 3
to the MIDI IN of sound module 4.
Should the sound modules you are
controlling not have MIDI THRU ports,
please use routing mode 2 or 3 as shown in
diagram 2 on the following page.
Set sound module 1 to MIDI channel 1,
sound module 2 to MIDI channel 2,
sound module 3 to MIDI channel 3,
and sound module 4 to MIDI channel 4.
8