Philips AQ6421/18 - Manual (Page 6)

(
g
|) Operating Instructions
SUPPLY
Batteries: Insert as indicated two alkaline batteries, type R6, UM3 or AA. Remove the
batteries if exhausted or if they are not to be used for a long time.
Mains adaptor Connect a mains adaptor to the 3V DC socket.
The adaptor must supply 3V DC €>-€>-©, minuspole © to the 1.3 mm centre pin of the
3.4 mm socket
PLAYING BACK CASSETTES
Connect headphones to fi.
Open the cassette holder and insert the cassette in it with the open part facing the
buttons and the full reel on the right
To start playback, press ◄ .
Adjust the sound with VOLUME and DBB (bass).
To stop, press STOP and the set is switched off.
At the end of the tape the ◄ button is automatically released and the set is switched
off.
FAST WINDING
Press« or Press STOP to stop fast winding and also when the tape has reached
it’s end.
MAINTENANCE
Clean the magnetic head after every 50 hours of operation or once a month by playing
through a cleaning cassette.
Do not expose the set and cassettes to rain, moisture, sand, or to excessive heat from
e.g heating equipment or in motor cars parked in the sun.
The model number is located on the base of the set and the serial number in the battery
compartment
This product complies with the radio interference requirements of the European Community