Canon 93517 - Manual (Page 31)

31
Lightweight Field Tripod – #93591-A
Designed for Celestron’s C5 telescope, this rigid,
metal tripod weighs less than 10 lbs. and is very
compact when folded up. It’s great for traveling.
It can be used with the Celestar 8 telescope
when high portability is required.
An optional accessory tray (#93594) is available
for this tripod. Not only is the tray handy for
small accessories, but it also enhances the
overall rigidity of the tripod.
Adjustable 8" Tripod – #93499
This deluxe metal tripod has fully adjustable
legs with all metal clamps for positive
height adjustment. It’s designed for
Celestron’s C8, C9
1 /
4
and C11 telescopes,
and also makes a very stable and sturdy
platform for the C5+ telescope. A new leg
support has been added for additional
stability and the 2" diameter legs provide
excellent damping.
Vibration Suppression Pads –
#93503
Telescope and spotting scope vibration is
caused by windy conditions, an unsteady mount or tripod or even an
accidental bump to the instrument, and results in reduced image quality.
Celestron’s set of three Vibration Suppression Pads will reduce vibration time
by almost 100% and decrease vibration amplitude. The pads fit between the
bottom of the tripod legs
and the ground, a simple
and functional solution to
the problem of image
disturbance. They work on
any surface: grass, dirt,
concrete, asphalt, wood,
etc., for both telescopes
and spotting scopes.