System setup, Receiver adjustment – Philips FR999 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SYSTEM SETUP

Receiver adjustment

Once the number and position of the speakers has been fixed,

you can adjust the initial receiver settings for optimum

surround sound with the actual setup;

Set which speakers have been connected to the receiver

(see "Menus/BPEIRKf? REIUP").

Note: The initial setting of your receiver is:

two front speakers left and right: present

(cannot be altered)
center speaker: present

two rear speakers: present

subwoofer: present

Select the size of the speakers (5MRLL orLRPGP)

(see "Menus/5PERKR SIZES").

Select SriRLL if your speaker is able to reproduce low

notes down to at least 80-100 Hz,

Select LRPGE if your speaker is able to reproduce low

notes down to at least 50 Hz.

(As a rule of thumb, a LRPGE speaker has a cone diameter

of at least 12 cms (5 inches).)

See the specification sheets of your speakers.

Note: The Initial setting of your receiver is:

all speakers: LRRGZ

Set the distance from the speakers to the listener's position

(see "Menus/5PK ilGIRWEE").

Note: The initial setting of your receiver is:

all speakers: 10 feet (3 meters)

This manual is related to the following products: