Alpine CDE-100 - Manual (Page 9)

Specifications
FM RADIO SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
AM RADIO SECTION
Tuning Range
Sensitivity (lEC Standard)
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
87.7-107.9 MHz
5 dB/pV (S/N 30 dB)
27.2 dBf(12.6pV/75 ohms)
75 dB
62 dB
30 d В (at 15 kHz)
6.0 dB
530-1,710 kHz
50 pV/27 dB
20-20,000 Hz (±1 dB)
Below measurable limits
0.01% (at I kHz)
96 dB (at 1 kHz)
96 dB (at 1 kHz)
88 dB (at I kHz)
Power Requirement 14.4 V DC
(1 M6V allowable)
Power Output 18 W RMS X 4*
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and < I % THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage 2 V/47 k ohms
Bass
Treble
Weight
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
±12 dB at 100 Hz
±12 dB at 10 KHz
1.2 kg (2 lbs. 9oz)
178 mm (7”)
50 mm (2")
160 mm (6-5/16")
170mm(6-.3/4")
46 mm (1-13/16")
30mm(l-.3/l6")
Due to continuous pivducl improvement, specifications and desifiii
are subject to change without notice.
Wave Length
Laser Power
USB SECTION
USB Requirements
Max. Power Consumption
USB Class
File System
MP3 Decoding
WMA Decoding
AAC Decoding
Number of Channels
Frequency Response*
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
* Frequency response may
software/bit rate.
790 nm
CLASS I
1.1/2.0 Full Speed
500 mA
Mass Storage
FAT 12/16/32
MPEG-1/2 AUDIO Layer-3
Windows Media'*'^ Audio
AAC-LC format “.m4a” file
2-Channel (Stereo)
20-20,000 Hz (±1 dB)
0,01% (at 1 kHz)
96 dB (at I kHz)
96 dB (at 1 kHz)
88 dB (at 1 kHz)
differ depending on the encoder
FRONT AUX INPUT SECTION
Input Impedance
Allowable External Input
Connector
10 kohms
2.0 V
3.5 mm Ф Stereo mini-pin