Power supply – Philips AZ 7595/00 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
POWER SUPPLY
Mains adapter
(supplied or optionally available)
AY 3160 mains adapter 4.5 V/400 mA direct current, positive pole to the center pin
1
Make sure that the local voltage corresponds
to the voltage of the adapter.
2 Connect the mains adapter to the player's
4.5
V DC socket and to the wall outlet.
Note: -Use only the AY3160 adapter, other
products may damage the set.
-No acoustic feedback when using the
adapter.
-Always disconnect the adapter when you are not using it.
Batteries, type LR6, UM3 or AA
(supplied or optionally available)
Open the battery compartment and insert 2
alkaline batteries or the rechargeable battery
pack.
Typical playing times under normal conditions:
Alkaline batteries: 15 hours (ESA off)
12 hours (ESA on)
18 hours (PSM on)
Remove batteries if empty or if the CD player
not to be used for a longer period of time.
Note: The battery conditiori will be indicated in the display:
-Full batteries: no indication.
-Weak batteries:
- symbol flashes. This symbol is not available when
rechargeable batteries are used.
-Empty batteries: <=: -symbol flashes and the message ô/Tiré- appears.
-Replace the batteries or connect the mains adapter.
Batteries contain chemical substances, therefore they should be dispesed of
properly.