Philips AZ 7595/00 - Manual (Page 16)

OPERATION
m
3
(3
ESA - Electronic Shock Absorption Memory
PSM - Power Save Mode
Press the ESA button repeatedly to switch to ESA—PSM—off.
-► The ESA/PSM symbol lights up in the display.
The ESA memory continuously stores in advance the CD
data to be played. This is to prevent sound skipping
during play due to shock and vibration.
-► Prolonged shocks and vibrations may empty the ESA
memory completely and CD play will be interrupted.
Note: When switching the ESA and PSM feature on and off. CD play will be delayed
or interrupted for a short time.
RESUME/HOLD
RESUME - playing from where you have stopped
1 Activate the RESUME feature by sliding the RESUME/HOLD
switch to the center setting.
2 If you stop CD play by pressing the STOP M button, tbe last
position played will be stored.
3 Press ►!! to resume CD play from the position it was
stopped at.
HOLD - deactivating all buttons
Activate the HOLD feature by sliding tbe RESUME/HOLD switch to the far right.
-► Now all buttons are locked until you switch the feature off again. If you press a
button (except OPEN), the display will indicate HOLD.
Note: - In the HOLD position, the RESUME function is automatically activated.
- Opening the lid erases the infonnation about the position played last.
16