Power supply – Philips AZ7181 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
POWER SUPPLY
Mains adapter
(supplied or optionally available!
AY 3160 mains adapter 4.5 V/400 mA direct current, positive pole to the center pin
1 Make sure that the local voltage corresponds
to the voltage of the adapter.
2 Connect the mains adapter to the player's
4.5 V DC socket and to the wall outlet.
Note: -Use only the AY3160 adapter, other
products may damage the set.
-Always disconnect the adapter when you
are not using it
Batteries, type LR6, UM3 or AA
(supplied or optionally available)
Open the battery compartment and insert 2
alkaline batteries or the rechargeable battery
pack.
Typical playing times under nonmal conditions:
Alkaline batteries: 14 hours
not to be used for a longer period of time.
Note: The battery condition will be indicated in the display:
-Full batteries: no indication.
-Empty batteries: cc -symbol and the message 6/TEE appear.
-Replace the batteries or connect the mains adapter.
Batteries
contain
chemical
substances,
therefore
they
should
be
disposed
of
properly.