Operation – Philips AZ7181 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION

RESUME/HOLD

RESUME - playing from where you have stopped

1 Activate the RESUME feature by sliding the RESUME/HOLD

switch to the center setting.

2 If you stop CD play by pressing the STOP ■ button, the last

position played will be stored.

3 Press ►!! to resume CD play from the position it was

stopped at.

HOLD-deactivating all buttons

Activate the HOLD feature by sliding the RESUME/HOLD switch to the far right.

-► Now ali buttons are locked until you switch the feature off again. If you press a

button (except OPEN), the display will indicate HOLD.

Note: -In the HOLD position, the RESUME function is automaticaliy activated.