Philips 17PT1563 - Manual (Page 8)

Other menu adjustments
BRIGHmESS Hi” 'M2
COULOUR ■■ 30
U.SI
SHARPNESS ”37
COL. TEMP. NORMAL
CONTRAST PLUS ON
VOLUME mmiiiii
BALANCE ■■ 30
TREBLE
SPATIAL OFF
VOLUME LIMIT OFF
CHILO LOCK
TIMER__________
INSTALLATION
EXIT
Picture adjustment
Display the Picture menu.You can now access the adjustments for
BRIGHTNESS, COLOUR, CONTRAST, SHARPNESS and
COL. TEMP.: which adjusts the colour temperature of the piaure;COOL
(blue white), NORMAL (balanced) or WARM (red white).
CONTRAST PLUS: which enables clarity of the contrast.
Sound adjustment
Dispiay the Sound menu.You can now set the VOLUME, and make the
following adjustments for stereo equipment: BALANCE, TREBLE, BASS and:
SPATIAL-this function enhances the stereo effect, giving the impression
that the speakers are positioned further apart.
VOLUME LIMITER: this function is used for automatic level control in
order to avoid sudden increases in volume (particularly when changing
channels or during advertisements).
Storing adjustments
Storing is automatic: once an adjustment is made using the menus,
it is stored automatically (this happens after 1 minute if no action is taken
or as soon as an other programme is selected). The adjustments for the
EXT sockets and for programmes 0 to 11 are stored individually: a different
adjustment is possible for each of these programmes (except for the volume).
The adjustments for programmes 12 to 99 are stored in the same way.
To restore the factory' picture settings on a channel, select the channel, press the smart
picture contml button until NATURAL is displayed on the saeen. Modify one of the
picture settings in the menu as disaibed above (this will automatically store the settings).
Surf function
This menu is used to select the function to be attributed to the P
key on the remote control. Display the menu, then:
O
Selea P
0 Press the (H£I key to exit the menu.
PREVIOUS PROG, mode: the P
to access the last programme watched.
SURF LIST mode: the P
programmes (maximum of 8).To store this list:
O
Display one of your favourite programmes (e.g. number 4).
0
Before the number disappears, press the P-«P EOS key.
The SURF LIST message appears.The programme is stored.
© Repeat operations
O
and © for each programme to be stored
(e.g. programme No. 9,1 and 12).
O Use the P
(in our example Nos. 4,9,1 and 12).
• To reset the surf list, set the P
menu to
PREVIOUS PROG and then to SURF UST.