Philips 17PT1563 - Manual (Page 5)

Manual store
This menu allows you to store each programme manually.
From the INSTALLATION menu;
O
Select MANUAL STORE key) and press
The MANUAL STORE menu appears,
e
Select SYSTEM (according to model). Use the ^ key to select the
standard reception, EFiANCE (standard LL’), EUR. W (BG) or UK (I).
© Select SEARCH and press I^.The search begins.
As soon as a programme is found, the search will stop.
The frequency band is displayed (VHF1,VHF3 or UHF).
Use the <3 key to select the frequency band.
If no programme is found, refer to the «Tips» chapter (page 8).
O If the reception is not satisfactory, select FINE TUNE and hold down
key <3 or I5> to adjust.
0 Select PROG. NUMBER and enter the required programme number using
the ^ keys or using keys ® to ®.
O Select STORE and press
The message OK appears.The programme is stored.
O Repeat steps © to O for each programme to be stored.
© To exit from the MANUAL STORE menu, press the (^) key several times.
Skip the programmes
This menu allows you to skip programmes which can be accessed using
the P ¿Sb keys on the remote control.
From the INSTALLATION menu:
O
Select SKIP (¿^ key) and press
The SKIP menu appears
© Select PROG. NUMBER (¿^ key) and use the <9 ^ keys or keys ®,
to ® to select the programme you wish to skip.
© Select SKIP and use the <9 keys to choose YES to skip the
programme or NO so that it remains accessible
Only the programmes found during the search are set to NO (all other
programmes are set 'to YES by default).
O Repeat steps © and © for as many programmes as you wish to skip.
© Press the l»™“l key 3 times to exit from the INSTALLATION menu.
The P keys on the remote control can now be used to access
those programmes and EXT sockets which are set to NO in the list.
The programmes skipped can always be accessed using keys ® to ®.
To exit from the menus ...
Press the l»™“l key several times.