Philips XS2757CI - Manual (Page 9)

□ A ctivating the S tart U p C hannel
T Tsed along with the Clock fea-
C-/ tures, you can select a specific
channel that the television will tune
to when the Timer Active control is
turned ON.
C begin !
Press the CLOCK button to
display the Clock onscreen menu.
Press the CURSOR UP ^ or
CURSOR DOWN ■ button until
the word CHANNEL is highlighted.
Press the number buttons to
enter the start up channel you
would like the television to start on.
SET CLOCK 10:00 AM
TIMER ACTIVE ON
I CHANNEL
START TIME - - : - - A M
Remember: Be sure to set
I the Timer Active control to
ON.
The onscreen menu will time out
and disappear from the screen when
you finish, or you can press the
STATUS/EXIT button to clear the
menu from the screen.
S etting THE TV’s S tart
U p T ime
T Tsed along with the Clock fea-
v_y turCy you can select a specific
time the television will turn on
when the Timer Active control is
turned ON.
□
I dis
Press the CLOCK button to
display the Clock onscreen menu.
Press the CURSOR RIGHT
or CURSOR LEFT but­
tons to set either AM or PM time.
1^^
Press the CURSOR UP ^ or
CURSOR DOWN ■ button until
the words START TIME are high­
lighted.
Enter the time to turn on the
TV using the NUMBERED but­
tons. If the first number is a single
digit first enter a zero then the digit
(ie, press “0”, then press “8”).
TIMER ACTME O N
CHANNEL 12
ISTARTTIME - - : - - A M 1
TIMER ACTIVE
CHANNEL
□N
12
ISTARTTIME 08:30 AMI
12 8:30
If the TV is in use when the
START TIME control is about
to be activated, the screen will
display a warning stating it's
going to change channels in 30
seconds. It will appear like the
screen shown below and.
change to the selected start up
channel. Pressing any button
on the remote within this count
down will cancel the change.
CHANGING
TO CHANNEL B
IN 30 SECONDS
Remember: Be sure to set
^ the Timer Active to ON.