Philips XS2757CI - Manual (Page 8)

□
S etting the TV’ s C lock
y our television comes with an onscreen
clock. During normal operation the clock
appears on the screen when the STATUSIEXIT
button is pressed.
Press the CLOCK button on the remote
to display the onscreen CLOCK menu.
<|> Press the CURSOR UP ►OR CUR­
SOR DOWN ■ buttons until the words
SET CLOCK are highlighted.
Enter the current time using the
NUMBERED buttons. If the first
number is a single digit first enter a zero
then the digit (ie; press “0”, then press “8”).
Press the CURSOR RIGHT ►►or
CURSOR LEFT <4^ buttons to set either
AM or PM time.
Note: The CLOCK onscreen menu can also
be accessed through the main menu by press­
ing the MENU button; then scrolling
up/down with the CURSOR UP ► or
CURSOR DOWN ■ buttons until the word
CLOCK is highlighted. Press the CURSOR
RIGHT ►► button to activate the CLOCK
menu and follow the steps above to set the
time.
Remember: Be sure to
^ press “0” first and then the
hour number for single digit
entries.
To clear the onscreen menu press
the STATUS/EXIT button or wait a
few seconds after you have finished
your adjustment and the menu will
automatically disappear from the
screen.
Note: If a power failure occurs, the TV's
CLOCK will have to be reset.
If no time is set, the time will not appear
onscreen.
A ctivating the TV’ s O n T imer C ontrol
n
Tust like an alarm clock you can set
U the TV to turn itself on at the same
time everyday.
CBBOIN)
Press the CLOCK button to display
the Clock onscreen menu.
Press the CURSOR UP ^ or CUR­
SOR DOWN ■ button until the words
TIMER ACTIVE are highlighted..
Press the CURSOR RIGHT
or CURSOR LEFT button to
select ON (if activating) or OFF (if
deactivating) the Timer control.
SET CLOCK1QCXD AM
[TIMER ACTIVE 0^
CHANNEL 12
START TIME --:--AM
SETaOCK 10:00 AM
[TIMER ACTIVE oi^
CHANNEL 12
START TIME --:--AM
© ‘ (
2
) ®
® ® ®
@ ®
Remember: Be sure to set the
fi clock and the time you want the
television to turn on using the START
TIME control as described on the next
page.
The onscreen menu will time out and
disappear from the screen when you
finish, or you can press the STATUS/EXIT
button to clear the menu from the screen.