Philips HP6378 - Manual (Page 7)

Use the precision trimmer with the precision comb to trim bikini line.
U Put the precision trimmer attachment on handle (fig. 3).
You will hear a click.
Q Slide the precision comb into the guiding grooves on both
sides of the trimmer and push until it‘clicks’ into place (fig. 4).
Q Press the Hair Length Selector (1) and slide it up or down (2)
to the desired trimming length setting (fig. 5).The selected
setting number will appear on the colored circle on the handle.
See Table 1 for settings.
I If you are trimming for the first time, start by using the comb at the
maximum trimming length setting (#5). As you become familiar with
the settings, adjust Hair Length Selector to desired trimming length.
Selector will “click” into position at each setting.
D Switch the trimmer ON.
Q To trim in the most effective way, move the trimmer against the
direction of hair growth (fig. 6). Make sure the surface of the
comb always stays in contact with the skin. For easier trimming,
stretch the skin with your free hand (fig. 7).
NOTE: Since all hairs do not grow in the same direction, you
Trimming your bikini line with Precision Comb
may
want to try different trimming directions ('i.e.. upwards, downwards, or
acrossV Practice is best for optimum results.
> If a lot of hair has accumulated in the comb, remove the comb and
blow and/or shake the hair out of the comb.You can also use the
cleaning brush provided to remove hair from the comb area.
Table 1. Precision Comb
Setting Remaining hair iength
(in.) /(mm)
.08 in/2mtn
. 16 in/4mm
.24 in/6mnn
.31 in/8mm
.39 in/10mm
k REMEMBER:You must reset the hair length selector back to your
desired setting every time you replace the comb on the appliance.
I
The remaining hair length corresponds with the smallest distance
between the cutting blade and the spot where the comb is in
contact with the skin.