Carrier DATACOLD 500 T/R - Manual (Page 27)

Page 27 62-61138-20 (02/03)
Enclosure C Factory settings
5. Temperature inputs Factory setting
5.1. T1 input On
5.1.1. Type Temperature
5.1.2. Name Return Air
5.2. T2 input On
5.2.1. Type Temperature
5.2.2. Name Rear
5.3. T3 input Off
5.4. T4 input Off
6. Digital Inputs
6.1. D1 Input Off, Refrigeration
6.2. D2 Input Off, Back door
6.3. D3 Input Off, Defrost
6.4. D4 Input Off, Side door
7. Compartment settings
7.1. Compartment 1 On
7.1.1. Compartment name Comp.1
7.1.2. Print T1 Yes
7.1.3. Alarm on T1 Yes
7.1.4. Print T2 Yes
7.1.5. Alarm on T2 Yes
7.1.6. Print T3 No
7.1.7. Alarm on T3 No
7.1.8. Print T4 No
7.1.9. Alarm on T4 No
7.1.10. Print D1 No
7.1.11. Print D2 No
7.1.12. Print D3 No
7.1.13. Print D4 No (Yes with Carrier Unit)
7.2. Compartment 2 Off
7.3. Compartment 3 Off
7.4. Compartment 4 Off
8. Alarm settings
8.1. Alarm group 1 Off, Frozen
8.2. Alarm group 2 Off, Chilled
8.3. Alarm group 3 Off, Dry
8.4. Alarm group 4 Off, Free text
9. Printer settings
9.1. Graph upper limit +59°F (+15°C)
9.2. Graph lower limit -22°F (-30°C)
9.3. Graph mm. per h. 0.4 inches (10 mm)
9.4. User menu Yes
9.5. Delivery ticket setting Actual+average
9.6. Print time period 10 hour
9.7. Day start time 00:00
9.8. Day end time 18:00
10. General settings
10.1. Temperature units Degrees C
10.2. Sample rate 10 min.
10.3. Vehicle ID AB-1234
10.4. Header text Abcdef
10.5. PIN code 1111
10.6. Correction factor +0
10.7. Serial number