FingerTec Hardware Connection through Ethernet User Manual

Page 4

Text mode
Original mode

LAST UPDATE 29 MAY 2006

CONNECTION THROUGH ETHERNET

Take note on the followings:

• Make sure the column “Disabled” is unchecked.
• Make sure your product key and activation code are the same as on
software installation CD.
• ID number of device is the same as in the column “ID”.
• Select the TCP/IP in the column “Connection”.
• Ignore Baud rate when you are using TCP/IP as connection.
• IP address of device is the same as displayed in the column “IP address”.

• Always leave the column “Key” as blank.