FingerTec Hardware Connection through Ethernet User Manual
Page 3
Copyright
2006 by FingerTec Worldwide Ltd. All rights reserved.
LAST UPDATE 29 MAY 2006
CONNECTION THROUGH ETHERNET
For Windows XP user, they are advised to assign a specific IP address for
computer in used before using the “ping” command.
If no IP has been assigned. The device will not reply to the ping command
and
instead “unreachable destination” will be shown on the screen.
Assign an IP address
f o r c o m p u t e r i f
Windows XP is used.
3.
You may now launch TCMS v2.1.0 software by double-clicking TCMS v2
icon. Look for the option “Finger Biometric Settings”. In Finger
Biometric Option, select the “FingerTec® Terminal Setting” to configure
as
below:
3