Compaq 5017 - Manual (Page 9)

Reference Guide 3–1
3
Installation
Monitor Setup
Before installing your monitor, place it in a convenient,
well-ventilated location near your computer.
1. Turn off the power to your computer and other peripheral
devices.
2. Connect the monitor signal cable to the video connector 1 on
the rear panel of the monitor.
3. Place the monitor signal cable into the clip 2 on the back of
the monitor.
4. Connect the monitor audio cable to the audio connector 3 on
the rear panel of the monitor. (select models only, cable not
shown in illustration)
5. Connect the AC power adapter cable to the power connector
4 on the rear panel of the monitor.
6. Connect the video signal cable to the video connector 5 on
the rear panel of the computer.
7. Connect the audio cable to the audio connector 6 on the rear
panel of the computer. (select models only, cable not shown
in illustration)
8. Connect the AC power cord to the AC adapter 7.
9. Connect the power cable 8 to an electrical wall outlet.