Fieldmann FDV 2003-E - Manual (Page 9)

EN
IMPACT DRILL OPERATING INSTRUCTIONS
9 Machine description and included contents | Putting into operation
3. MACHINE DESCRIPTION AND ITEMS
DELIVERED
Machine Description (see pic. 1)
1. ON/OFF switch
2. ON/OFF switch lock button
3. Rotary speed selector
4. Rotation direction selector
5. Drill
6. Standard/Impact drilling selector
7. Auxiliary handle
8. Drilling depth indicator
9. Quick-release chuck
10. Ventilation apertures
11. Power cord
12. Two gear speed
Items Delivered
Remove all contents from the box and inspect to ensure no damage was incurred during shipping, and that the
items listed below are included:
Impact drill
Ergonomic handle
Drilling depth indicator
Warranty card
Instruction Manual
Tool kit
Should the components be missing or damaged, contact the dealer of the machine.
4. SAFETY INSTRUCTIONS
Before drilling into walls make sure that you are not breaking into an electricity, gas or water supply line. Use
a suitable detector.
Always unplug the drill before changing a drill or bit.
The chuck key should always be stored in the key holder.
To avoid injuries, securely attach the work piece with a vice or clamp.
When drilling or driving a screw: Do not allow the motor to stall under the load.
In the event of an electrical or mechanical malfunction, immediately switch the drill off and disconnect
the plug.