Fieldmann FDV 2003-E - Manual (Page 10)

EN 10
FDV 2003-E
Safety instructions | Appropriate application | Adjustment and operation
WARNING! While impact drilling, wear suitable ear protective equipment. Exposure to the excess noise
levels can cause hearing loss.
WARNING! Use auxiliary handles supplied with the tool. Loss of control can cause a serious personal
injury.
5. APPROPRIATE APPLICATION
The FDV 2003-E tool is intended for impact drilling in bricks and concre and drilling in wood, metal, ceramics
and plastics.
The tools equipped with electronic controls and right/left rotation are also suitable for screwing and
threading.
Use the machine and accessories only for the above mentioned applications. All other applications are
expressly ruled out.
6. OPERATING INSTRUCTION
Impact/Standard drilling selector
Function
FDV 2001-E, FDV 2002-E
10 EN Safety instructions | Appropriate application | Adjustment and operation
WARNING! While impact drilling, wear suitable ear protective equipment. Exposure to the
excess noise levels can cause hearing loss.
WARNING! Use auxiliary handles supplied with the tool. Loss of control can cause a
serious personal injury.
5. APPROPRIATE APPLICATION
The FDV 2001- E and FDV 2002- E tools are intended for impact drilling in bricks and concret
and drilling in wood, metal, ceramics and plastics.
The tools equipped with electronic controls and right/left rotation are also suitable for
screwing and threading.
Use the machine and accessories only for the above mentioned applications. All other
applications are expressly ruled out.
6. ADJUSTMENT AND OPERATION
Impact/Standard drilling selector
Function
6
- use the drilling function to drill holes in wood or metal.
Move the selector 6 to the right.
Function
6
- use the impact drilling function to drill holes in concrete.
Move the selector 6 to the left.
Variable speed control
Variable speed is controlled by pressing the trigger and adjusting the knob on the switch.
Set the “reversing” and “forward” switch to get clockwise and anti-clockwise rotation.
The power tool works with variable speed between 0 and maximum speed depending on
pressure you put on the master switch 1.
Lower pressure results in lower speed and facilitates the smooth, properly controlled start of
the drilling operation.
Do not overload the power tool; it would stop.
Chuck
The chuck of reversible drills is always fixed by a screw with a left hand thread.
Loosen the screw prior to chuck removal.
- use the drilling function to drill holes in wood or metal. Move the selector 6 to the right.
Function
FDV 2001-E, FDV 2002-E
10 EN Safety instructions | Appropriate application | Adjustment and operation
WARNING! While impact drilling, wear suitable ear protective equipment. Exposure to the
excess noise levels can cause hearing loss.
WARNING! Use auxiliary handles supplied with the tool. Loss of control can cause a
serious personal injury.
5. APPROPRIATE APPLICATION
The FDV 2001- E and FDV 2002- E tools are intended for impact drilling in bricks and concret
and drilling in wood, metal, ceramics and plastics.
The tools equipped with electronic controls and right/left rotation are also suitable for
screwing and threading.
Use the machine and accessories only for the above mentioned applications. All other
applications are expressly ruled out.
6. ADJUSTMENT AND OPERATION
Impact/Standard drilling selector
Function
6
- use the drilling function to drill holes in wood or metal.
Move the selector 6 to the right.
Function
6
- use the impact drilling function to drill holes in concrete.
Move the selector 6 to the left.
Variable speed control
Variable speed is controlled by pressing the trigger and adjusting the knob on the switch.
Set the “reversing” and “forward” switch to get clockwise and anti-clockwise rotation.
The power tool works with variable speed between 0 and maximum speed depending on
pressure you put on the master switch 1.
Lower pressure results in lower speed and facilitates the smooth, properly controlled start of
the drilling operation.
Do not overload the power tool; it would stop.
Chuck
The chuck of reversible drills is always fixed by a screw with a left hand thread.
Loosen the screw prior to chuck removal.
- use the impact drilling function to drill holes in concrete. Move the selector 6 to the left.
Variable speed control
Variable speed is controlled by pressing the trigger and adjusting the knob on the switch.
Set the “reversing” and “forward” switch to get clockwise and anti-clockwise rotation.
The power tool works with variable speed between 0 and maximum speed depending on pressure you put
on the master switch 1.
Lower pressure results in lower speed and facilitates the smooth, properly controlled start of the drilling
operation.
Do not overload the power tool; it would stop.
Chuck
The chuck of reversible drills is always fixed by a screw with a left hand thread