Lawn care, Service – Fieldmann FZR 4621-BV User Manual
Page 15
![background image](/manuals/675795/15/background.png)
EN
PETROL LAWNMOWER
USER'S MANUAL
15
Lawn care | Servicing
9. LAWN CARE
LAWN CARE
Various forms of care are required depending on the type of grass area.
Therefore, always read the instructions included on seed packages with respect to the mowing height for the
growing conditions in the given locality.
It is necessary to always keep in mind that the larger part of grass consists of a stem and one or more leaves.
When the leaves are cut off completely, the lawn is damaged and the renewal of growth will be much more
diffi cult.
The following instructions generally apply:
– excessively low mowing causes disruption to the roots and subsequently "spotty" appearance;
– in summer, mowing must be higher to prevent the soil from drying out;
– mowing wet grass may result in a lower effi ciency of the blade due to grass catching on the blade and
grass being ripped out of the ground;
– in the event of exceptionally tall grass it is appropriate to perform the fi rst mow at the maximum permitted
mowing height of the machine and then mow again only after two or three days.
The lawn will have a better appearance when it is mowed regularly over its entire area at the same height with
alternating mowing directions.
10. SERVICE
In the event that after purchasing the product you fi nd any kind of defect, contact the service department.
When using the product, follow the instructions contained in the included user's manual.
A complaint will not be accepted if you modifi ed the product or if you did not follow the instructions in the
user's manual.
WARRANTY DOES NOT COVER
Normal wear and tear of operating parts of the machine as a result of its use
Servicing tasks related to standard maintenance of the machine (e.g. cleaning, lubrication, tuning, etc.).
Defects caused by external effects (e.g. climatic conditions, dustiness, inappropriate use, etc.)
Mechanical damage resulting from the machine being dropped, impact, etc.
Damages resulting from unprofessional handling, overloading, use of incorrect parts, inappropriate tools, etc.
On returned products that were not properly protected against mechanical damage during transport, the risk
of potential damage is borne exclusively by the owner.