Fieldmann FZS 2002-E - Manual (Page 17)

17
OPERATING INSTRUCTIONS ELECTRIC STRING TRIMMER
EN String trimmer startup | Maintenance | Technical specifications
WARNING! RISK OF INJURY! Cutting elements keep rotating for a certain time after the
motor was switched off. • Do not attempt to stop the cutting element (nylon string) by your
hands. Let it stop by itself.
Note: Recommendation: When cutting grass in the operation position A, set the angle
between the cutting blades and ground to ca. 10°, you will reach the optimum performance
of the trimmer. When operating, you can hold the string trimmer and move it from left to right
and consequently from right to left. You will reach the optimum performance of the electric
string trimmer. (Fig. 15).
9. MAINTENANCE
The trimmer string can dry out in the process of time. To keep the nylon string in a perfect
condition, store the spare pre-wound spools or loose string in a plastic bag with a spoon of
water.
clean the string trimmer, remove the battery and use a mild soap and a damp cloth only.
Do not immerse the trimmer in water, nor hose it down. Avoid any liquid to get inside the
string trimmer. Do not use pressurized water when cleaning the machine.
The line-cutting blade on the safeguard side can get blunt. Regular sharpening of the blade
with a file is recommended.
10. TECHNICAL SPECIFICATIONS
Voltage / frequency 230-240V~/50Hz
Input power 500W
No-load speed 11000 rpm
Cutting width 300mm
Instructions Manual - language version only.