Expert Sleepers Oomingmak v1.0.0 - Manual (Page 19)

Pitch
Sets the amount by which the Oscillator and ReSynth sections’ pitches are modulated by
the envelope.
Filter
Sets the amount by which the Filter’s cut-off frequency is modulated by the envelope.
PWM
Sets the amount by which the Oscillator’s square wave’s pulse-width is modulated by the
envelope.
Pitch LFO
This section lets you apply a low frequency
modulation to the Oscillator and ReSynth mod-
ules’ pitch.
Shape
Lets you choose the LFO waveform from:
• Sine
• Tri(angle)
• SawUp
• Square
• SawD(ow)n
Speed
Sets the LFO frequency, in Hz.
Amount/Fine
Set the amount of pitch modulation applied. ‘Amount’ is in semitones; ‘Fine’ is in cents.
Filter LFO
This section lets you apply a low frequency modulation to
the filter’s cut-off frequency.
Shape/Speed
As for the Pitch LFO, above.