Empress Effects Tremolo2 - Manual (Page 8)

Controls at a Glance
Power: 9V - 12V DC. 100mA or greater - +
Depth: The amount of tremolo effect applied to signal.
Mode: Sets the operation mode of the pedal.
Rate | Ratio: In knob mode, this sets the
speed of the tremolo effect.
In tap tempo mode, this sets the ratio of
foot taps to tremolo pulses. For example,
at a 1:2 ratio, the tremolo will do eighth
notes when you tap quarter notes.
Knob: The rate of the tremolo is controlled by the rate
knob.
Tap Tempo: The rate of the tremolo is set by tapping
on the tap stompswitch.
Preset: Save and recall settings stored in up to 8
presets.
Knob: Press for a brake that slows the tempo of the
tremolo while switch is held down.
Presets: When scrolling through presets, this LED will flash.
Press the bypass switch to engage the new preset.
Tap Tempo: Tap to set the tempo of the tremolo
effect. Tapped tempo is multiplied by the ratio to set
the rate of the tremolo effect.
Preset: Press to scroll through presets.
Bypass: Press to engage / bypass the pedal. When the LED is
illuminated, the tremolo is engaged.
Tap | Preset: Perfoms a different function in each mode.
Save: Use to save presets and assign expression pedal control.
Output