Listening to the radio – Emerson Radio ES50 User Manual

Page 12

1 1

LISTENING TO THE RADIO

1.) Press the POWER button on the main unit or the remote control. The main

display turns “On” and the STANDBY indicator goes “Off”.

2.) If necessary, press the TUNER button on the top panel of main unit or the

FUNCTION button on remote control to select the Tuner function. The display

will show an AM or FM station frequency. To select a different band, press the

STOP/BAND button.

3.) Tune to the desired frequency as follows:

• Manual Tuning

Repeatedly press the

buttons until the frequency of the desired

station appears on the display.

• Automatic Tuning

Press and hold the

buttons until the display begins to move, then

release the buttons. The tuner will search up or down the band for the next

strong station and stop on that station. Repeat this procedure until the tuner

stops on your desired station.

4.) Adjust the VOLUME and EQ controls as desired.

5.) If you tuned to an FM Stereo station the STEREO indicator will appear in the

display.

6.) When you are finished listening press the POWER button on the main unit or

remote control to return to the Standby (Power Off) mode. The STANDBY LED

Indicator comes “On”.

ES50_ib071403.p65

14/7/2003, 11:40