Emerson Radio PD6810 - Manual (Page 10)

9
COMPACT DISC PLAYBACK
IMPORTANT ! The unit should not be carried around during CD playback. If the unit is bumped
and shocked during playback, the disc may skip or stop.
5.) Press the PLAY/PAUSE button. Playback
will begin on track 1 “PLAY ” and ‘track no’
will appear on the display.
3.) Insert a disc with the label
side facing up. Press down
near the center hole to make
s u r e t h e d i s c i s f i r m l y
seated on the spindle.
4.) Close the CD DOOR by
pushing it down. The
display will show the total
tracks of the CD.
TO INTERRUPT PLAYBACK
Press the PLAY/PAUSE button once during playback. Playback pauses
and the “PLAY
” indicator flashes. Press the PLAY/PAUSE button again
to cancel pause and resume playback at the same point in the track. “PLAY ”
indicator stops flashing.
TO SKIP TO THE BEGINNING OF THE TRACK
1.) Press either one of the REV / FWD skip buttons according to the
desired skip direction.
2.) Playback resumes from the selected track.
3.) When the button is pressed once during playback, the player advances
to the beginning of the next track.
4.) When the button is pressed once during playback, the player returns to
the beginning of the track being played. To back up to the beginning of the
previous track press the button twice.
SEARCHING FOR A PASSAGE WITHIN A TRACK
Keep the / button pressed during playback, and release
the button as soon as you recognize the desired passage. Normal CD
playback will resume from this point.
1.) Slide the FUNCTION switch
to CD position, the POWER
LED will turn on. The display
will show the symbol “- -”.
2.) Press the CD OPEN
button to open the CD
door.
TO STOP PLAYBACK
Press the STOP button to stop playback and the display shows the total
tracks of the disc.
Note : After pressing the STOP button wait a few seconds for the disc to
stop completely before opening the CD door.
Track number
PD6810_T051807.P65 18/5/2007, 15:05 9