Emerson Radio GP208 - Manual (Page 6)

6
OPERATING INSTRUCTIONS
Slide the FUNCTION switch to
the AM or FM ST position; the
POWER indicator will light.
NOTE: If you select the FM band,
be sure to raise the FM rod
antenna and extend it to its full
length.
1
Adjust the VOLUME ❶ and BASS
BOOST ❷ as desired.
2
1
4
Rotate the TUNING control to
select a station. The FM STEREO
indicator will light when a strong
FM station is received.
3
Set the VOLUME control to a low
setting.
2
When you have finished listening,
slide the FUNCTION switch to the
POWER OFF position.
5
HINTS FOR BETTER RECEPTION:
FM - Make sure that the telescopic FM rod antenna is raised and extended to its full length. You may have to
vary the direction of the antenna to find the strongest signal for each FM station.
AM - The AM ferrite bar antenna is located inside the cabinet. It may be necessary to turn the unit slightly so
that the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to
find the position that provides the strongest reception for each of your favorite AM stations.
BASS BOOST:
Press this button to the On (in) position to enhance the overall bass sound. Press to the Off (out) position for
normal listening.
LISTENING TO THE RADIO
GP208 O/M.QXD 7/24/02 1:43 PM Page 6