EDCO TS-14 - Manual (Page 7)

Page 7
TS-14-I-0714
E-SPTS-I-0809
800-638-3326 • edcoinc.com • [email protected]
EQUIPMENT DEVELOPMENT CO., INC.
Machine Operation:
• Make sure the power switch on the machine is in the OFF position before proceding. Plug the machine into an
electrical outlet. The blade drive starts as soon as the machine is switched on by pressing the black button.
The forward drive unit starts by squeezing the deadman lever. Push the handle forward to engage the drive
wheels. The drive lever can be locked in the moving position by stepping on the foot lever at the bottom of the
handle. Return to neutral by lifting foot lever with your toe.
Neutral Locked
• ADJUSTING THE HANDLE
The height of the handle bar can be adjusted to adapt to
the operator. Loosen the clamping lever handles at the base
of of the handle bracket. Raise or lower to suit.
Retighten after adjustment.