Ecler TP-NET - Manual (Page 15)

15
MIMO88 DIGITAL MATRIX
TYPE PARAM1 PARAM2 PARAM3 PARAM4 DESCRIPTION
SET PRESET Sets the current PRESET
ILEVEL Sets the current LEVEL of an Input Channel
OLEVEL Sets the current LEVEL of an Output Channel
XLEVEL Sets the current LEVEL for a Matrix point
IMUTE YES/NO Sets the current MUTE status of an Input Channel
OMUTE YES/NO Sets the current MUTE status of an Output Channel
XMUTE YES/NO Sets the current MUTE status for a Matrix Point
GPO Sets the current value for a General Purpose Output
INC ILEVEL Increases the current LEVEL of an Input Channel by
Value (Value can range from ±1 to ±100)
OLEVEL Channel> Increases the current LEVEL of an Output Channel
by Value (Value can range from ±1 to ±100)
XLEVEL Increases the current LEVEL of a Matrix point by
Value (Value can range from ±1 to ±100)
DEC ILEVEL Decreases the current LEVEL of an Input Channel
by Value (Value can range from ±1 to ±100)
OLEVEL Channel> Decreases the current LEVEL of an Output Channel
by Value (Value can range from ±1 to ±100)
XLEVEL Decreases the current LEVEL of a Matrix point by
Value (Value can range from ±1 to ±100)
SUBSCRIBE ALL Subscribes to all VU-meters
IVU Subscribes to an Input Channel VU-meter
OVU Channel> Subscribes to an Output Channel VU-meter
UNSUBSCRIBE ALL Unsubscribe to all VU-meters
IVU Unsubscribe to an Input Channel VU-meter
OVU Channel> Unsubscribe to an Output Channel VU-meter
Note: INC and DEC commands are replied with a DATA command from the device with the resulting LEVEL value, after it has been increased or decreased.
When the INC or DEC command tries to adjust a LEVEL value beyond its minimum or maximum limits, no reply ( DATA command) will be produced.