Ecler TP-NET - Manual (Page 13)

13
NPA STEREO AMPLIFIER SERIES
TYPE PARAM1 PARAM2 PARAM3 PARAM4 DESCRIPTION
SET POWER ON/OFF Sets the Device Power status
PRESET Sets the current PRESET
OLEVEL Channel> Sets the current LEVEL of an Output
Channel
OMUTE Channel> YES/NO Sets the current MUTE status of an
Output Channel
SUBSCRIBE ALL Subscribes to all VU-meters
OVU Subscribes to an Output Channel VU-
meter
UNSUBSCRIBE ALL Unsubscribe to all VU-meters
OVU Unsubscribe to an Output Channel VU-
meter
DATA POWER ON/OFF Shows the Device Power status
PRESET Shows the current PRESET
OLEVEL Channel> Shows the current LEVEL of an Output
Channel
OMUTE Channel> YES/NO Shows the current MUTE status of an
Output Channel
OVU Shows the VU-meter value of an Output
Channel
ALARM_PROTECT ON/OFF Shows the Protect alarm status of an
Output Channel
ALARM_THERMAL ON/OFF Shows the Thermal alarm status of an
Output Channel
ALARM_LOAD ON/OFF Shows the Load alarm status of an Output
Channel
ALARM_VOLTAGE ON/OFF Shows the Voltage alarm status of the
Device
INFO_NAME “” Shows the Device Name
INFO_MODEL Shows the Device Model
INFO_VERSION Shows the Firmware Version
INFO_MAC Shows the Device MAC address
ERROR “” Informs about an error