Ecler VERSO SERIES - Manual (Page 4)

4
1. IMPORTANT REMARK
Congratulations! You are the owner of a carefully designed and manufactured equipment.
We thank you for trusting in us and choosing our VERSO Series loudspeaker cabinets.
In order to get the optimum operation and efficiency from this unit, it is VERY IMPORTANT
- before you plug anything - to read this manual very carefully and bear in mind all considerations
specified within it. We strongly recommend that its maintenance be carried out by our Authorised
Technical services.
2. WARNINGS
No user serviceable parts exist inside these units.
Never use this unit in the proximity of water. Do not expose the unit to water splashing, nor
place liquid containers on top of it.
Avoid placing the unit next to heat sources.
Use only the accessories specified by the manufacturer that are appropriate for each
connection. Do not hang up the equipment by its carry handles.
Keep these instructions and respect the warnings contained in them.
3. INTRODUCTION
The speakers of VERSO series have been designed to cover a wide range of applications:
From conference rooms, where considerable intelligibility is required, to outdoor applications such as
marquees, mobile discos, meetings, presentations, etc. These are situations that require good sound
projection, a high sound pressure level and reliable operation.
All the models are made of high density plastic and protected by an acoustically transparent
perforated grille at the front. All the models have an efficient Larsen high-frequency protection
system (acoustic regeneration or coupling) and signal clipping. The connection plates are fitted with
Speakon® connectors.
4. MODELS
VERSO 8 (150W RMS / 8 ohms):
Uses an 8” bass speaker (woofer). A 34 mm motor is used as a high frequency transducer.
VERSO 10 (250W RMS / 8 ohms):
Fitted to a 10” bass speaker. A 34 mm motor is used for high frequencies.
VERSO 12 (350W RMS / 8 ohms):
Uses a 12” speaker that supports wide ranges of movement. A 44 mm motor is used for high
frequencies.