Ecler UMAI SERIES - Manual (Page 5)

5
4. MODELS
UMA112i
Loudspeaker with 15mm thick, high quality plywood. Contains a 12'' woofer. Ceramic
magnet with 77mm coil. The high way wears a 1'' compression driver with mylar diaphragma,
attached to a (50º-100º) x 55º diffusor. Trapezoidal shape.
Provides lateral handles and an additional handle on the back side with Speakon
connectors for signal input and stack output, 35mm pole socket and embedded nuts with M10 thread
that allow to hang-up.
UMA115i
Loudspeaker made with 15mm thick, high quality plywood. Contains a 15'' woofer. Ceramic
magnet with 100mm coil. The high way wears a 1'' compression driver with mylar diaphragma,
attached to a (50º-100º) x 55º diffusor. Trapezoidal shape.
Provides lateral handles and an additional handle on the back side with Speakon®
connectors for signal input and stack output, 35mm pole socket and embedded nuts with M10 thread
that allow to hang-up.
UMA SB118i
Subwoofer unit. Loudspeaker made with 15mm thick, high quality plywood. Contains an
18'' woofer. Ceramic magnet with 100mm coil.
Provides lateral handles and an additional handle on the back side with Speakon®
connectors for signal input and stack output, 35mm pole socket and embedded nuts with M10 thread
that allow to hang-up.