Ecler CKL SERIES - Manual (Page 4)

4
1. IMPORTANT NOTE
We thank you for trusting on us and choosing this Ecler product.
In order to obtain the maximum performance and perfect operation, it is VERY IMPORTANT that you
carefully read this manual before connecting the unit, taking special attention to the safety warnings here
described.
In this manual you will find a practical guide on how to correctly set up this product for the most common
applications. However, due to the versatility of the system, it is not possible to describe each and every
installation possibility. In case you need assistance for a special installation, Eclers Projects Department
"[email protected]" will happily help you find the optimal solution for your requirements.
Chapter 8. APPENDIX contains brief but concise explanations of frequently used terms in acoustics, which
are often used throughout this manual.
1.1. Safety instructions
HIGHLY DANGEROUS SOUND PRESSURE LEVELS
This family of acoustic enclosures easily produces sound pressure levels which may reach
120dB SPL at a distance of 10 metres (141dB SPL at 1m). This means that severe damage to
the auditory system can happen at a lower distance. Always make sure that the speakers are
not connected when working at their proximity.
RIGGING OF ACOUSTIC ENCLOSURES
The enclosures should never be flown using different hardware than specified in this instruction
manual. Use only the hardware and rigging systems mentioned in this manual. Physical
integrity of people depend on that. Any rigging installation should be carried out, inspected and
approved by qualified professionals.
•
No user adjustable parts exist inside these devices.
•
Do not use this device in the proximity of water. Do not expose the device to splashings, and avoid
placing liquid containers on top of them.
•
Do not place the device next to heat sources, lighting fixtures or stoves.
•
Only use hardware accessories specified by the manufacturer.
•
Keep the loudspeaker enclosures far away from magnetically sensitive devices, such as TV
screens, tape recorders or video recorders…
2. WARRANTY DESCRIPTION
Your ECLER equipment has undergone exhaustive laboratory and quality control tests before leaving
the factory. Nevertheless, your may be in need of our Technical Service during the period covered by
the Guarantee or afterwards. In that case, carefully protect your equipment in its original packing and
send it to our Technical Service with the transport and insurance paid. Attach a photocopy of your
Guarantee Certificate and a detailed description of the defect you have observed.
ECLER, S.A. guarantees its ECLER products against material or fabrication defects for a ONE-YEAR
period after the date of original purchase.
ECLER, S.A., will repair the defective equipment within the aforementioned period, with no charge for
parts and labour.
To ensure the validity of the Guarantee, it is essential that the attached Guarantee, Registration Card is
filled out correctly and remitted to your ECLER distributor, within 10 DAYS after date of purchase.
The Guarantee is non-transferable and protects the original buyer only.