beautypg.com

Ecler AMPACK SERIES User Manual

Page 4

background image

4

1. IMPORTANT REMARK

Congratulations! You are the owner of a carefully designed and manufactured equipment.

We thank you for having purchased our compact amplifier AMPACK.

It is VERY IMPORTANT that you read this manual before connecting the amplifier in order

to obtain its maximum performance.

We recommend our authorised Technical Services whenever any maintenance task should

be needed so that optimum operation shall be achieved.

1.1. Conformity with international standards

The AMPACK amplifier series complies with the following international standards:


EN55103-1 Electromagnetic compatibility.

Product family standard for audio, video, audio-visual and entertainment lightning control apparatus
for professional use

Part 1: Emission


EN55103-2 Electromagnetic compatibility.

Product family standard for audio, video, audio-visual and entertainment lightning control apparatus
for professional use

Part 2: Immunity


EN60065 Audio, video and similar electronic apparatus. Safety requirements

Guidelines 73/23/EEC and 2004/108/EC are therefore accomplished



2. INTRODUCTION

The compact amplifiers AMPACK series offers the most resistant and reliable amplification

technology available. Its design allows its usage in nearly every place and application that requires
power values up to 80W RMS at low impedance.

The AMPACK series offers the following features:


78W RMS (AMPACK80) / 24W RMS (AMPACK25) stereo amplifier

220-240V 50/60Hz power supply

AUTO POWER OFF: when no signal is present on the input, the AMPACK unit enters the standby
mode, reducing its power consume

Stereo, parallel and bridge operation possible

VCA based remote control for attenuation. Independent for each input channel

EUROBLOCK connectors for VCA input, output and control

Additional stereo RCA input connector

Independent gain controller for each channel

100Hz high pass filter

Controllers protected against accidental manipulation

Can be directly installed on 35mm DIN rail or individual holder