Casio exilim EX-Z80 - Manual (Page 80)

80
Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform
other playback operations.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
For information about menu operations, see page 56.
Playing a Slideshow on the Camera (Slideshow)
Start Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, and audio recordings
T
Only: Snapshots and audio snapshots only
»
Only: Movies only
One Image: One single selected image (selected using [4] and [6])
Time
Time from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Interval
Amount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
If you specify a value from 1 to 30 seconds, images change at the
specified interval, but the audio portion of movies and audio snapshots
will continue to play until the end.
When the slideshow reaches a movie file while “MAX” is selected, only
the first frame of the movie will displayed. Voice Recording files are not
played back when “MAX” is selected.
Effect
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change
effect.
• Patterns 1 through 4 have different background music, but they all
use the same image change effect.
• Pattern 5 can be used for playback of snapshots only, and the
“Interval” setting is ignored.
• The currently selected image change effect setting is disabled
automatically in following cases.
– When playing a slideshow for which “» Only” or “One Image” is
selected for the “Images” setting
– When the interval setting is 1 second or 2 seconds
– Before and after playback of a movie or Voice Recording file
Off: No image change effect or background music