Operating your telephone – Clarity C2210 User Manual

Page 18

the C2210 for you until you dial another

phone number.

Lamp
(This function is only available with the

optional Lamp Flasher Notification

Accessory.) First connect the Lamp

Transmitter to the telephone and the

Lamp Switch to a nearby lamp. Press and

hold the LAMP button for 1 second to

turn the connected lamp ON or OFF.
Headset Jack
The unit includes a 2.5 mm headset jack

for connection of a headset. In the

headset mode, the volume of the head-

set is controlled adjusting the Clarity

Power Volume Control.
Headset Operation
Press the HEADSET button to enable

the headset mode. Dial as normal.

The HEADSET button will illuminate

to indicate the phone is in the

headset mode.You may switch

between headset and handset

usage by toggling the HEADSET

button.

Ordering a Headset
In the event you wish to purchase a

headset for your C2210, please contact

Plantronics at 1-800-544-4660 for loca-

tion near you. We recommend using the

Plantronics M110 headset.

Neckloop Jack
A 3.5 mm jack is available for connect-

ing a neckloop.The volume to the neck-

loop is controlled by the telephone.

When the neckloop is plugged in, the

handset speaker is disabled.

Hearing Aid Compatibility
The handset has a special coil inside of

it to couple the sound to hearing aids

equipped with T-Switches/T-Coils.

Failsafe Power Operation
In the event of a power failure, you can

still make and receive calls, but the LCD

display, CID/PhoneBook operations,

Nightlite, and Extra Loud Ringer will not

function.The phone will ring, but not as

loud.

Operating Your Telephone