ebm-papst R2E180-CG82-01 - Manual (Page 3)

Operating instructions R2E180-CG82-01
Translation of the original operating instructions
2. PROPER USE
The device is exclusively designed as a built-in device for conveying
air according to its technical data.
Any other usage above and beyond this does not conform with the
intended purpose and constitutes misuse of the device.
Customer equipment must be capable of withstanding the mechanical
and thermal stresses that can arise from this product. This applies for the
entire service life of the equipment in which this product is installed.
Proper use also includes:
● Use the device only for moving exhaust air from exhaust gas
blowers for wood-based fuels.
● Using the device in accordance with the permitted ambient
temperature, see chapter 3.5 Transport and storage conditions and
chapter 3.2 Nominal data.
● Only using the device in stationary systems.
● Commissioning the built-in component only after installation in
the customer unit.
● Operating the device with all protective features in place.
● Minding the operating instructions.
Improper use
Using the device in the following ways is particularly prohibited and
may cause hazards:
● Operating the device with an imbalance, e.g. caused by dirt deposits
or icing.
● Moving highly corrosive air, e.g. salt spray mist. Exceptions are
devices that are intended for salt spray mist and protected accordingly.
● Operation with external vibrations.
● Operating the device in an explosive atmosphere.
● Operation in medical equipment with a life-sustaining or lifesaving
function.
● Contact with materials that could damage blower parts, e.g. liquids
during cleaning.
● Operation with completely or partially disassembled or modified
protective features.
● Using the device as a safety component or for taking on safety-
related functions.
● In addition, all application options that are not listed under proper use.
Item no. 11125-5-9970 · ENG · Revision 82891 · Release 2015-01-29 · Page 3 / 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com